MoistureShield Vision® Range

THIS TAB HIDEN BY DEFAULT

Yes. 50 years for the Vision line – 50 Year Fade & Stain Warranty and 50 Year Structural Warranty

Yes. Please see the Australian Warranty Document for full details. MoistureShield (Oldcastle APG) handles all warranties.

MoistureShield composite decking offers you superior durability far superior to any other timber decking that you can buy right here in Australia. MoistureShield composite decks are stain and scratch resistant, they will not rot, splinter, they are mold resistant, and there is never a need for oiling, staining or painting.

No. Zero Field Failures. MoistureShield products have stood up to the elements for more than 30 years with no structural field failures.

From your local authorised MoistureShield dealer. Fill out a contact form with your contact details and we can put you in touch with you local dealer. If none are close enough we can send you samples by mail.

MoistureShield decking requires far less maintenance than wood decking, but like any other thing dust and dirt build up over time. So to maintain your deck some form of periodic cleaning is required to keep the deck looking brand new for decades. MoistureShield composite decking simply requires a simple soap and water cleaning.

You should never Sand a MoistureShield composite Deck as this will void the warranty with respect to any conditions caused by sanding.

MoistureShield high-performance decking can be power washed. Use only a fan tip and up to a 3100 psi power washer to remove dirt and debris. The fan tip should be no closer than 200mm away during use.

No, CoolDeck® Technology Helps create more comfortable outdoor living environments by reducing heat by up to 35%.**

Yes, MoistureShield composite decking has been manufactured with durability, and longevity in mind. The durability of these Composite decks makes them suitable for both commercial and residential settings.

Yes, grooves can be cut into the side of MoistureShield decking which then allows you to use the Hidden Fastener system. The Hidden Fastener system allows for deck installation without visible screw heads on the surface of the boards. For greater convenience, we also offer Groove edged boards which are boards which come pre-grooved, ready to install the Hidden Fastener system.

Yes, MoistureShield composite decks can be ripped or planned to reduce the width of the board. However, a Composite board should never be ripped or planned to reduce thickness. Please see the MoistureShield installation instructions for more information on how to install MoistureShield boards without voiding your warranty.

Not as a primary fastener but glue can be used as a secondary fastener – see instructions in the Installation Guide for more details.

Yes. Unlike other composites and timber MoistureShield can be installed directly to any surface, in the ground and even under water!

No, the decking should not be painted or stained, as there is no need for these time-consuming tasks.